A lot can go wrong when you’re chopping up onion on your kitchen counter. In the worst-case scenario, you might accidentally chop off a finger or two before you notice. But as long as you have the best glue for cutting boards nearby, there’s no need to worry about your fingers.
Cutting boards get beat up pretty easily, but that doesn’t mean they should be thrown in the trash and replaced with something new each time they show some wear and tear. You can repair them with a little bit of glue and they’ll look just as good as new. It’s quick, it’s easy and it won’t cost you an arm and a leg to do so.
The glues listed below will work for any type of wood, which means these handy tips can be applied to cutting boards made out of hardwood or softwood, or wooden cutting boards manufactured from composites (like ceramic or plastic). For the most part, these glues will work for any type of repair work in your kitchen: repairing a split countertop or a chipped dish and even mending your favorite wooden spoon.
There are a few different types of glue that will work well on cutting boards. Below is a list that may help you decide which one to use based on the type of board you have and whether it’s made out of hardwood or softwood materials.
Super Glue: This type of glue is extremely strong and bonds just about any material instantly. It’s great for repairs where you need a quick fix, but it doesn’t offer much in the way of flexibility. You’ll have to be very careful when using this type of glue because it will bond immediately.
White Glue: This is a good choice for both soft and hardwood cutting boards. It provides ample time for adjustments and convenient removal from your surface with water if needed. It’s a good choice for gluing on magnets, as well, so this one is also a good option for repair work that involves magnets.
Clear Epoxy: This glue works especially well when you need to glue small parts or pieces of wood together. It’s not nearly as strong as other glues, so you will want to use caution when repairing boards with this type of glue.
Wood Glue: For hardwood cutting boards, epoxy is stronger and more resistant to wear and tear than wood glue. However, when working with softwood cutting boards, there is no comparison – wood glue is the best choice. It’s a great option for softwood cutting boards because the flexibility it provides will help your cutting board last longer.
Best Glue for Cutting Boards 2022
When repairing your cutting boards, you can use pretty much any of these glues for fixing small chips or cracks in their surfaces. But if your boards are riddled with deep scrapes or gouges and you need a stronger bond, you’ll have to find the right glue. There are glues out there that will be powerful enough to patch big holes and nicks in hardwood boards, but to use them, you’ll need some basic glue-making supplies.
You can buy these supplies at most home renovation stores or online at sites like Amazon.com. Or you can order them from a site like Rockler, which provides many woodworking supplies and woodworking tools that are printed with the actual part numbers for your project. In addition to every type of glue you’ll need for your cutting boards, you’ll be able to find the specific glues and adhesives that match your project using this type of tool.
1.Gorilla Wood Glue
This is probably the strongest glue you can use for your cutting board repairs. It is designed especially for wood, so it will provide any hardwood cutting board with the maximum amount of durability and strength.
The secret behind the power of Gorilla Wood Glue lies in its formula, which contains soybean oil (instead of water). This makes it extremely thick and very hard to remove from your hands after usage (so keep a paper towel handy for quick clean-ups). Fortunately, the strong adhesive power makes up for it.
This is a water-proof glue, which means you can use it on wet surfaces and the bond will still be just as strong as if you use it on a dry surface. It’s also resistant to moisture, which means you can use it outdoors without having to worry about rain or snow.
You can also apply Gorilla Wood Glue with a damp rag instead of having to spread it with your hands (which makes cleanup much easier).
One downside to this glue is that it’s not very flexible. It will take a long time for the bond to be broken down with water, so if you’re working with softwood or composite cutting boards, you might want something that’s a little bit more forgiving.
Titebond III Ultimate Wood Glue
This is a waterproof glue that offers good adhesion and flexibility, although it’s not as flexible as other glues you’ll find. It comes in several different types – Liquid Hide Glue and Liquid Hide Glue Brush-On are just two examples.
Titebond III Ultimate Wood Glue is the strongest of all Titebond glues, which means it will work on any type or texture of wood. It does not contain any water, so you don’t need to worry about getting it all over your hands when it’s dry. It has very strong holding power and is one of the few wood glues that will work on wood grain.
It can be used on a variety of surfaces and surfaces – it adheres to both porous and non-porous surfaces. However, unlike Gorilla Wood Glue, this glue doesn’t have very good flexibility.
This glue is designed to be used in a closed container, which means that it won’t dry out if you let it sit for a few days. You will have to use it immediately after opening the container to make sure the paste has dried completely (which can take up to a few days).
Although this glue does not contain water, there are still two things you should consider before making your purchase. First, it has a very strong odor, which is not going to be pleasant for most people. Fortunately, the odor will dissipate over time.
Second, you should consider whether you actually need this type of glue for your repairs. Titebond III Ultimate Wood Glue is probably not the best choice for softwood cutting boards because it’s not very flexible and the residual odor will permeate your board (making it unpleasant to use).
3.Titebond II Ultimate Wood Glue
This is the original Titebond wood glue, which was invented in the 1970s by a professor Brandon Harris of Louisiana State University. Since then, it has become one of the most popular two-component wood glues used by woodworkers around the world.
Titebond II Ultimate Wood Glue lasts much longer than other glues, and it will adhere to porous surfaces and non-porous ones without any problems whatsoever. A dip in acetone will dry the glue down, which is why you should use it with a paintbrush instead of your hands.
The bottle does not have any protective cap, so don’t be surprised if you accidentally squeeze out a few drops as you’re moving the glue around. To avoid it happening again, you’ll need to purchase a bottle with a different type of cap for your safety.
One downside to this type of glue is that it contains water and acetone components, which means that it can be pretty messy. If you’re working with a softwood cutting board, this glue will stick to the surface and leave a residue that’s impossible to remove.
4.Titebond II Premium Wood Glue
This is another Titebond wood glue, although it has slightly different properties from the original Titebond – it comes in one gallon bottles and is less greasy than its brother. This type of glue is less sticky and more flexible, which makes it a good choice for softwood.
You can also use it with other types of wood, but it’s probably not the best choice for composite cutting boards since its adhesion is not the strongest. In fact, you should only use this type of glue with softwoods when you need flexibility in your project.
This glue is also a bit more difficult to apply than the original Titebond II. The 1:1 glue ratio means that you’ll need to mix equal parts of both components before using it, which can be a little annoying.
However, you will get less fumes from mixing it this way. Unlike the original Titebond II, this glue won’t produce a lot of fumes when you’re mixing the components together or applying it with a paintbrush.
Gorilla Fast Grab Adhesive
Gorilla Fast Grab Adhesive is best suited for wood, but it will also work on non-porous surfaces like plastic and metal. It’s a strong adhesive that holds together well, even when you’re working with parts that don’t fit perfectly (which can be annoying).
One of the best things about this glue is that it dries fast – it only takes a few minutes to dry completely. This type of glue is best suited for areas that need to be water-resistant, such as decks and patios.
It also comes with a special black nozzle that makes it easier to control the amount of glue that’s released, so you won’t have any messy drips or extra glue left on your surface. Another thing you should know is that this glue comes in two different sizes – 32 ounces and 16 ounces.
Titebond Extend Ultimate Wood Glue
Titebond Extend Ultimate is one of the thinnest wood glues you will find on the market today, so it’s perfect for most projects. It stays flexible, which means that it will never harden and crack over time. This type of glue is also waterproof and it’s made from pure tung oil and resin ingredients, making it one of the most natural glues you will find anywhere.
The only downside about this glue is that it has a strong odor – but it’s not as strong as other Titebond glues. It also doesn’t contain any water, so you don’t have to worry about getting it all over your hands when you’re using it.
General Tension Adhesive
General Tension Adhesive is usually recommended for users who need to use their glue on wide surfaces, such as plastic or wood. It’s designed to withstand extreme conditions and it can also be used in cold environments.
This glue does not have a scent, and it comes with a special nail-shaped nozzle that makes it easier to control the amount of glue that gets released when you’re applying it. However, this type of glue is a bit difficult to clean up if you accidentally get it on your fingers.
Gorilla Epoxy Resin Kit
You can create virtually any shape with the Gorilla Epoxy Resin Kit – there are no limits to what you can build using this product! This bundle comes with various accessories that make it easier for users to create any type of design.
It’s one of the strongest wood glues you will find on the market, and it can be applied to a wide variety of surfaces without leaving any residue behind. Cleaning up is very easy – you only need to use warm water and soap to get rid of the residue.
Unfortunately, this glue will also shrink over time as it cures, which can be annoying when you’re working with surfaces that need to fit tightly together. However, you don’t have to worry about this problem with Gorilla Epoxy Resin Kit.
5 in 1 Wood Glue System
This is a wood glue that comes with five different components – including two specialized glues (100% solvents and epoxies), and three resin-based wood adhesives that are ideal for softwoods. The best thing about this kit is that it’s very easy to use – you only need to mix the glue and apply it according to the instructions that come with it.
This glue has a neutral smell, which means that you won’t be able to detect any of the components in the glue. One downside to this type of glue is that you should use it with a paintbrush instead of your hands – mixing the ingredients can get messy.
The Green Glue is made from 100% natural ingredients and it’s completely safe for the environment. This type of glue also doesn’t contain any water, so you don’t need to worry about getting it all over your hands. It comes in a squeeze bottle, which makes clean up very easy.
When you’re using this type of glue, you don’t need to mix the components – just apply it directly on the surface that you want to attach. One of the best things about this product is that it’s completely clear, which means you will be able to see exactly where you need to apply it.
Choosing the Best Wood Glue for You
Now that you know about some of the best wood glues for different purposes, what should you do next? The answer depends on how detailed and specific your needs are. The best way to get an idea of whether or not a particular glue is right for you is to read user reviews before buying it.
One of the most important things you should know about wood glues is that they all have different characteristics, so some products will be better suited for specific applications than others. Read product descriptions carefully and pay attention to the instructions that come with your chosen glue before purchasing it.
These are some of the best wood glues available today – and each one of them is designed to provide maximum holding power, whether you’re working with small projects or larger ones. With any of these products in your toolkit, you will be able to create the perfect item for any project. If you have any questions about these products, please leave a comment below.
- 1 Best Glue for Cutting Boards 2022
- 2 1.Gorilla Wood Glue
- 3 Titebond III Ultimate Wood Glue
- 4 3.Titebond II Ultimate Wood Glue
- 5 4.Titebond II Premium Wood Glue
- 6 Gorilla Fast Grab Adhesive
- 7 Titebond Extend Ultimate Wood Glue
- 8 General Tension Adhesive
- 9 Gorilla Epoxy Resin Kit
- 10 5 in 1 Wood Glue System
- 11 Green Glue